KH 51.2V 150Ah Lithium-ion Battery for Telecom Application
Keheng offers this lithium-ion battery for telecom applications, built to provide stable and continuous power for communication systems. It works well in:
-
Telecom base stations and remote towers
-
Data centres and UPS backup systems
-
Solar storage and hybrid systems
-
Off-grid telecom infrastructure
It helps keep your systems running without interruption.
Standard Rack Design for Fast Deployment
This lithium battery is built for efficient deployment in real projects. It uses a rack-mounted design. It improves space utilisation and keeps your setup clean.
At the same time, it simplifies on-site wiring and installation. As a result, you save time and speed up project delivery.
LiFePO4 Chemistry with Stable Pack Design
-
Long cycle life – over 6000 cycles at 80% DOD. In typical telecom use, even with one full charge and discharge per day, it can run for more than 15 years.
-
Fast charging: 75A charging current at 0.5C. Even during short power recovery periods, it quickly restores backup energy. This improves power security for the next outage.
-
7.68 kWh capacity: A battery can support core base station equipment (BBU + AAU) for about 2 hours. You can also extend the runtime by adding more batteries.
-
The wide temperature range: works from -20°C to 60°C. It fits real telecom environments across different climates. It remains stable at high temperatures and continues to discharge normally at low temperatures.
-
IP55 protection: helps block dust and resist water splashes in base stations and edge sites.
Modular Parallel Design for Easy Expansion
This lithium-ion battery for telecom applications supports up to 14 units in parallel.
Whether you are upgrading 2G/3G sites, expanding high-power 5G stations, or preparing for future 6G deployment, you can scale capacity easily.
With this modular design, you connect batteries in parallel to increase backup power.
This means:
-
You can use the same battery setup from single sites to large network deployments.
-
You can build energy storage projects in stages, reducing upfront cost pressure.
-
You can simplify inventory when supplying batteries for projects or distribution.
Multiple Certifications for Smooth Project Delivery
This battery meets international standards such as UN38.3, MSDS, CE, IEC, and UL.
So, during real projects, you can move faster across shipping, on-site installation, and final acceptance. You avoid repeated certification checks. As a result, you speed up the overall delivery process.
Flexible Setup for Different Projects
We offer flexible options to match different telecom and energy storage needs. You can adjust:
-
Capacity
-
Structure design
-
System integration
We fine-tune the setup based on project size, load demand, and deployment environment. So, the battery fits your project better and avoids unnecessary system oversizing. In the end, you get better use of your investment.
Technical Specification
|
General characteristics
|
|
|
Mode
|
KH-ES48150
|
|
Cell Technology
|
(Lithium-iron Phosphate) LiFePO₄
|
|
Nominal Voltage
|
51.2V
|
|
Nominal Capacity
|
150Ah
|
|
Dimension (L×W×H, mm)
|
626×482×270mm
|
|
Approx. Weight
|
65kg
|
|
Electrical characteristics
|
|
|
Operating Voltage
|
41.6V~58.4V
|
|
Recommended Charge Current
|
75A
|
|
Max Cont. Discharge Current
|
150A
|
|
IP Rating
|
IP55
|
|
Charge Temperature
|
0°C ~ 45°C
|
|
Discharge Temperature
|
-20°C ~ 60°C
|
|
Storage Temperature
|
-10°C ~ 45°C
|
|
Cycle Life
|
>6000 Cycles (80% DOD)
|
|
Communication
|
RS485/RS232/CAN
|
|
Parallel Connection
|
Maximum 14 units
|
|
Certification
|
UN38.3, MSDS, CE, UL & IEC (Cell certificated)
|
|
Service Life
|
15 Years
|
Reviews
There are no reviews yet.